Huawei All FireHose and Kirin Loader File with Flash Tool Download Free

Huawei All FireHose and Kirin Loader File is a basic part of stock firmware for Qualcomm & kirin powered Huawei honor phones, It comes with Bin, Xml, Mbn, Elf, and Ldr extensions and stores the partition data, and verifies the memory partition size. You can use it for multi-purpose on your Qualcomm, Kirin, powered Huawei Honor phone such as Remove Screen lock, Flash Firmware, Remove FRP, Repair IMEI, also fix any type of error by the help of QPST/Qfil and Huawei Flash tool or any other third party repair tool, So, download basic firmware Huawei All FireHose and Kirin Loader File from below.

FireHose and Kirin Loader File is a component of stock firmware for all Qualcomm, Huawei kirin, and Honor phones. The zip file will contain the following device model names and files. You can download the correct Huawei All FireHose and Kirin Loader File for your smartphone here for free to repair your phone.

More: All Qualcomm “Prog eMMC Firehose” Programmer file Download

Download Huawei All FireHose and Kirin Loader File with Flash Tool

File Name:
File Size: 100MB
Download: Userdrive
Download: Qualcomm USB Driver || Huawei USB Driver || Huawei USB COM Driver
Flash Tool: Oppo Flash Tool


How to use Image Download Software

  • If Qualcomm drivers are already installed on the pc then SKIP this.
  • Download Stock Firmware (.mbn located ) of your Coolpad phones and extract it at the pc (if in the event you’ve downloaded the Stock Firmware then SKIP this Measure or else you’re able to come across the Stock Firmware onto Qualcomm Stock ROM or via Google).
  • Currently, Extract Qualcomm Flash Tool on the computer (assuming you’ve already downloaded it not Download Coolpad Flash Tool).
  • As Soon as You have extracted the application, You’ll Be able to see the following setup files:
  • Coolpad Flash.exe to Launch the application:
  • After the Flash Tool is started, you will Have the Ability to see the next window:
  • Click the Browse button:
  • Find the .cpb firmware on your pc:
  • Switch off the Mobile Device > Press and Hold Power and Volume Down key simultaneously to input the Download mode.
  • Connect your Device to the Computer with the USB cable:
  • Click on the Loading button to Permit the flash device to find the connected apparatus.
  • Click on the Flash button:
  • Again Click on the Verify button to Start the flashing or setup procedure:
  • when the flashing or setup Procedure is finished, You’ll Be able to see the Flashing Completed message on the application.
  • Congratulations! Now, Close the Qualcomm Flash Tool on the pc Disconnect the phone, and Restart it.

Related articles may you like: 

Share on:

He has more than 6 years of experience in software and technology, obsessed with finding the best solution for a mobile device whether it is Apple or Android. He loves to publish tutorials on Android IOS Fixing. 🙂

Leave a Comment