Hard Reset Nokia C1 TA-1165 with Tool: If you are searching for a solution to factory reset Nokia C1 to wipe all data or want to remove/bypass the screen lock in your Nokia C1 then here you have come to the best place. In the following guide, we cover each and every method of Master Factory Reset Nokia C1 easily. So, check the below step-by-step process to perform a hard reset by device hardware keys and Nokia Android Go settings.
Screen Lock is a privacy protection lock for android devices, You can enable screen lock by (Pattern/ Pin/ Face/ Fingerprint) on any Android phone. Once the screen lock is enabled then the user needs to enter the correct Password, Pattern, Pin lock to access the device once again.
We recommend you that remove all accounts from the device before performing a factory reset. This is especially if you intend to sell your Nokia C1 to prevent problems for the new user, as some modern devices have a function called FRP (Factory Reset Protection) that asks for the same Google account used in the phone.
If you have forgotten the screen lock on your phone then the factory reset can be helpful for you. Here, you will get the correct idea to Reset Nokia C1 and Remove the Password/Pattern/Pin Lock successfully. So, without wasting any time follow the below simple steps and download all required files to your computer.
This tutorial will show you how to master reset your Nokia C1. Learn how to perform a hard reset using hardware keys and Android 10 GO settings.
Note: This Method only works for Nokia Android 10 Go OS phones.
Disclaimer: Remember that a reset (or return to the factory condition) in a mobile deletes its entire content. You should back up your data before you do this if you don’t want everything to go away.
Download Factory Hard Reset Nokia C1
How to Hard Reset Nokia C1 TA-1165
- First, Power off your Nokia C1 phone
- Then Download & extract the GSM XTM Avenger Tool V1.8
- Now install SPD USB Driver to your PC
- Then Run the GSM_XTM_Avengerv1.8_Loader.exe as Admin
- Now Go to the Spreadturm Diag Tab
- Click on Enter Diag
- Now press the (Vol + & Vol -) together
- It will enable the Diag Mode on your phone
- Now click on Factory Reset
- The factory reset process will be started
- Wait for finish
- Once finished, it will reboot to normal mode
- Then set up the phone