If you own a Tecno In1 Pro, and after the hard reset if you stuck at google account verification screen then here we will solve your problem by unlocking FRP lock from your device, so just follow this process that helps FRP Bypass Tecno In1 Pro, there is a couple of methods to unlock FRP from your device but we share here the latest and easiest method to Techno In1 Pro FRP by FRP Bypass File.
This phone has some strong features, the front camera of this phone is good enough to provide crisp and clear selfies and the storage of this device is sufficient enough to store a big amount of images, videos and kinds of music, Techno has a decent processor and RAM management is very good while you do multitasking with this device.
Things That you Needed to Tecno In1 Pro FRP
You can follow this method on any Tecno In1 Pro FRP, Only you need a good internet connection and download some files To Bypass FRP Techno In1 Pro.
Warning:- This method is only for the device owner.
Note:- This method is successfully applied to Tecno In1 Pro.
Caution:- We are not responsible for any damage to your Device. before you try this method backup your Full data.
- -Download FRP File:- (Download Agent) file that helps you to detect your device in SP Flash Tool.
- -Techno I5 Pro FRP Bypass file and Tool:- It’s a new tool for remove frp.
- -Download & Install MTK USB Driver.
- -Follow the below guide carefully.
Now install MTK USB Driver to Computer:
- -Open the “USB Driver” folder, there you will see a “setup.exe” file.
- -Install the “Setup.exe” file by double-tapping on it.
- -Then hit next -next-next -finish to install the MTK driver to your computer.
- -Done. now your device will easily detect on PC.
FRP Bypass Tecno I5 Pro
- First, download & extract all the downloaded files by using 7zip or WinRAR.
- There you will see “3” folders. <i> FRP Bypass Files, <ii> FRP tools, <iV> DA File.
- Extract “FRP Tool” and “FRP File” on your PC.
- Then open the FRP tool folder.
- Run as Administrator “SP Flash Tool.exe”.
- Go to “Download” tab.
- Click on “Choose” from the “Download-Agent” that helps you to configure your device in the SP flash tool.
- Give the file path of boot file “MTK-ALL-IN-ONE-DA.bin”. – file on the extracted FRP files folder.
- Click on “Choose” from “Scatter-loading File”
- Now give the file path of “Scatter.txt” file from the “FRP File” folder.
- Go to the Format tab to Bypass FRP Tecno In1 Pro (See Below image).
- Select “Manual Format Flash” from that tab.
- Give the below address from that box.
Start_addr: 0x6A00000 End_addr: 0x100000
- After changing the value.
- Power off your Tecno phone.
- Connect your device to PC.
- While connecting press (Volume Down) key, and connect your device to PC.
Note:- Make sure, before you connect your device to PC, you need to download and install USB Driver first on your PC. when you connect your device to PC keep pressing Volume down key few more seconds after connecting.
- Click “Start” button.
- Once finished, you will get a “Right exclamation mark” popup.
- You have successfully Tecno In1 Pro FRP.
- Just disconnect your device to PC and Power On your device.
Subscribe Our Channel For More Interesting Videos Daily (On Youtube):-SUBSCRIBE
Thanks for visiting us, Comment below if you face any problem With Bypass FRP Tecno IN2 with Latest FRP File, we will try to solve your problem as soon as possible. you can check other some tutorials here to help you.