If you own a Techno In1 Pro, and after the hard reset if you stuck at google account verification screen then here we will solve your problem by unlocking FRP lock from your device, so just follow this process that helps FRP Bypass Nokia 1 (TA-1066), there is a couple of methods to unlock FRP from your device but we share here the latest and easiest method to Nokia 1 (TA-1066) FRP with FRP Bypass File.
This phone has some strong features, the front camera of this phone is good enough to provide crisp and clear selfies and the storage of this device is sufficient enough to store a big amount of images, videos and kinds of music, Techno has a decent processor and RAM management is very good while you do multitasking with this device.
Download Nokia 1 FRP Bypass Files & Tools
You can follow this method on any Techno In1 Pro FRP, Only you need a good internet connection and download some files To FRP Bypass Nokia 1 (TA-1066).
Note:- This method is successfully applied to Nokia 1 (TA-1066).
Caution:- We are not responsible for any damage to your Device. before you try this method backup your Full data.
- Download Nokia 1 DA File:- (Download Agent) file that helps you to detect your device in SP Flash Tool.
- Nokia 1 (TA-1066) FRP Bypass file and Tool:- It’s a new tool for remove frp.
- Download & Install MTK USB Driver.
- Follow the below guide carefully.
- -Open the “USB Driver” folder, there you will see a “setup.exe” file.
- -Install the “Setup.exe” file by double-tapping on it.
- -Then hit next -next-next -finish to install the MTK driver to your computer.
- -Done. now your device will easily detect on PC.
How to Bypass FRP Nokia 1 (TA-1066)
- First, Download & extract FRP Files & tools using 7zip or WinRAR.
- Once done, now there you will see “3” folders. <i> FRP Bypass Files, <ii> FRP tools, <iV> DA File.
- Open FRP tool folder.
- Run “SP Flash Tool.exe”.
- Goto “Download” tab.
- Click on the “Choose” from the “Download-Agent” tab, that helps you to configure your device in SP flash tool.
- Now Give the file path of boot file “MTK-ALL-IN-ONE-DA.bin”.
- Click on “Choose” from “Scatter-loading File”
- Now give there file path of “Scatter.txt” file from the “FRP File” folder.
- Go to format tab.
- Select “Manual Format Flash” from that tab.
- Give the below address from that box.
Start_addr: 0x6A00000 End_addr: 0x100000
- Power off & connect your device to PC.
- While connecting press (Volume Down) key, and connect your device to PC.
Note:- Make sure, before you connect your device to PC, you need to download and install USB Driver first on your PC. when you connect your device to PC keep pressing Volume down key few more seconds after connecting.
- Click “Start” button.
- Once the flashing process is finished, you will get a “Right exclamation mark” popup.
- Now you have successfully Nokia 1 (TA-1066) FRP.
- Just disconnect your device to PC and Power On your device.
Subscribe Our Channel For More Interesting Videos Daily (On Youtube):-SUBSCRIBE
Thanks for visiting us, Comment below if you face any problem With FRP Bypass Nokia 1 (TA-1066) with Latest FRP File, we will try to solve your problem as soon as possible. you can check other some tutorial here to help you.