Here I am going to share with you all Huawei MTK FRP File to download free from here. If you are a user of any Huawei MTK powered smartphones and looking for a solution of FRP verification. Then I am here to help you out. Just follow the below steps and download this Huawei FRP Files according to your device model and flash the FRP File using the SP Flash tool.
Warning:- This method is only for the device owner, not for any thief person.
Note:- We try this method on Huawei MTK Files, you can also try this method on the following devices.
This phone has some strong features, the front camera of this phone is good enough to provide crisp and clear selfies and the storage of this device is sufficient enough to store a big amount of images, videos and kinds of music, This device has a decent processor and RAM management is very good while you do multitasking with this device.
- Download Stock Firmware from below.
- Install Huawei USB driver on your PC.
- Make Sure: Flashing the right firmware flash file.
Download Huawei FRP Files
File Name: Huawei_FRP_File.ZIP
- Huawei Y6 (All Versions)
- 8A (All Versions)
- Huawei Y5 (All Versions)
Things That you Needed
You can follow this method on Huawei MTK devices, Only you need a good internet connection and download some files.
Warning:- This method is only for the device owner.
Note:- This method is successfully applied to Huawei Y5, Y6, 8A.
Caution:- We are not responsible for any damage to your Device. before you try this method backup your Full data.
First of all download all the files.
-Download the first FRP file that helps you to detect your device in FRP Tool.
-Huawei Y6 Prime FRP Tool:- It’s a new tool to remove FRP.
-Download & Install MTK USB Driver.
-Follow the below guide carefully to Huawei FRP Files successfully.
Download Flash Tool:-Here
Now install MTK USB Driver to Computer:
-Open the “USB Driver” folder, there you will see a “setup.exe” file.
-Install the “Setup.exe” file by double-tapping on it.
-Then hit next -next-next -finish to install the Samsung USB driver to your computer.
-Done. now your device will easily detect on PC.
Now follow to Huawei FRP Bypass with FRP Files
-First of all, download all the files from the above link.
-After that, now extract the FRP file and tool on your pc.
-Now open the extracted folder, there run SP flash tool.exe.
-Then on the “Download-Agent tab click on “Choose” and choose the “MTK all-in-one -da” file from the Huawei FRP tool ” folder
-Next, click on the “Scatter-loading” tab click on choose and then select “Android_scatter_Fastboot.txt “.
-Then click on the “Auth” tab and click on the “Choose” and then select the “Auth_Sv5. auth” file.
-Now go to the “Format” tab and select “manual format flash”.
-Open the “Android FRP WIPE.txt” file from the Huawei FRP Files folder.
-Copy and paste the format code.
Now Watch the Video.
Thanks for visiting us, Comment below if you face any problem With Huawei FRP Files, we will try to solve your problem as soon as possible. you can check other some tutorials here to help you.