Huawei Y7 2019 FRP Bypass (DUB-LX1 ) With FRP File

Is your Phone stuck at the FRP verification screen after the hard reset? if your answer is yes. Then here I will solve your problem by unlocking Factory Reset Protection lock from your Huawei DUB-LX1. So just follow this process to Huawei Y7 2019 FRP Bypass with FRP file very easily, So follow this method carefully.

There are a couple of methods available to unlock Google Account lock from your device but I share here the latest and easiest method to unlock Google Account lock?

Huawei Y7 2019 has some strong features, the front camera of this phone is good enough to provide crisp and clear selfies and the storage of the device is sufficient enough to store a big amount of images, videos, and kinds of music. It has a decent processor and RAM management is very good while you do multitasking with this device.

Warning:- This method is only for the device owner, not for any thief person.

Note:- We try this method on Huawei Y7 2019 DUB-LX1 FRP Bypass, you can only try this method on Huawei Y7 2019.

Pre-requirements

  • Download the Huawei Y7 2019 FRP File & Tool from below.
  • Install Huawei USB driver on your PC.
  • Follow the below guide carefully to Huawei Y5 2019 FRP Bypass successfully.
  • Make Sure: Flashing the right FRP file.

Caution:- We are not responsible for any damage to your Device. before you try this method backup your Full data.

Download Huawei Y7 2019 DUB-LX1 Dload FRP File

File Name: Mbn_9.1.0.ZIP
Size:3.0GB
Download: Huawei Y7 2019 FRP File

How to Huawei Y7 2019 DUB-LX1 FRP Bypass

To successfully bypass Google Account, first, you have to downgrade your phone by downloading the right flash file and follow the below process completely without skip any parts.

Flashing requirements:

  • At least 50% of battery charge.
  • Must need an SD card 8GB or more.
  • Download the right version of the firmware: Huawei Firmware

Flashing Instructions:

  • First, download the stock firmware on your pc.
  • Then extract the stock firmware and open the extracted folder.

huawei Honor firmware Flash FRP File

  • After that, insert the Micro SD card to your pc.

copy firmware Huawei Honor

  • Now make a new folder and change the name to dload.
  • Copy the firmware file and paste the file to your Micro SD card dload folder.
  • Now insert the micro SD card to your Honor phone.
  • Then power off your device and press and hold Volume UP + Down + Power key together until you see Huawei logo on your device.
  • Now the update process will be started, wait for finish.
  • Once finish, then tap on reboot.
  • Then power off your device again.
  • Press and volume up and power key to bring Huawei recovery mode.
  • Then wipe the device cache.
  • Power on your device with safe mode.
  • Now once power on your device you will see your device FRP lock will successfully unlock.

Well, here we have shared how to Huawei Y7 2019 DUB-LX1 FRP Bypass without PC. However, if you facing any error while downloading all the files you can let us know in the comment section.

Share on:

Leave a Comment