Huawei Y5 2019 FRP Bypass with FRP File and Tool
Is your Phone stuck at the FRP verification screen after the hard reset? if your answer is yes. Then here I will solve your problem by unlocking Factory Reset Protection lock from your Huawei Y5 2019. So just follow this process to Huawei Y5 2019 FRP Bypass with FRP file very easily, So follow this method carefully.
There are a couple of methods available to unlock Google Account lock from your device but I share here the latest and easiest method to unlock Google Account lock?
Huawei Y5 2019 has some strong features, the front camera of this phone is good enough to provide crisp and clear selfies and the storage of the device is sufficient enough to store a big amount of images, videos, and kinds of music. It has a decent processor and RAM management is very good while you do multitasking with this device.
Things That you Needed
You can follow this method on Huawei Y5 2019, Only you need a good internet connection and download some files.
- Warning:- This method is only for the device owner.
- Note:- This method is successfully applied to JAT-LX1.
Caution:- We are not responsible for any damage to your Device. before you try this method backup your Full data.
- First of all download all the files.
- -Download the first FRP file that helps you to detect your device in FRP Tool.
- -Huawei Y5 2019 FRP Tool:- It’s a new tool to remove FRP.
- -Download & Install MTK USB Driver.
- -Follow the below guide carefully to Huawei Y5 2019 FRP Bypass successfully.
Download Huawei Y5 2019 FRP File
Now install MTK USB Driver to Computer:
- -Open the “USB Driver” folder, there you will see a “setup.exe” file.
- -Install the “Setup.exe” file by double-tapping on it.
- -Then hit next -next-next -finish to install the Samsung USB driver to your computer.
- -Done. now your device will easily detect on PC.
Now follow to Huawei Y5 2019 FRP Bypass
- -First of all, download all the files from the above link.
- -After that, now extract the FRP file and tool on your pc.
- -Now open the extracted folder, there run SP flash tool.exe.
- -Then on the “Download-Agent tab click on “Choose” and choose the “MTK all-in-one -da” file from the Huawei FRP tool ” folder
- -Next, click on the “Scatter-loading” tab click on choose and then select “Android_scatter_Fastboot.txt “.
- -Then click on the “Auth” tab and click on the “Choose” and then select the “Auth_Sv5.auth” file.
- -Now go to the “Format” tab and select “manual format flash”.
- -Open the “Android FRP WIPE.txt” file from the FRP file folder.
- -Copy and paste the format code.
- -Power off your device first.
- -Remove the back cover of your device.
- -Then check the below pic and did the same. -Short the pin to GND.
- -Now press the volume up key to confirm the download mode on your device.
- -Ok Now connect your device to PC.
Thanks for visiting us, Comment below if you face any problem With Huawei Y5 2019 FRP Bypass, we will try to solve your problem as soon as possible. you can check other some tutorials here to help you.