Easy Jtag Plus latest Setup (Z3x EMMC Tool) Download

Easy Jtag Plus tool is an EMMC flash tool made by team Z3x that mainly helps to flash firmware, upgrade software, remove screen lock, Bypass FRP lock, read emmc storage, and many more options available to fix any smartphones. The installation process is too easy just follow the below installation steps carefully. It also repairing IC flasher easily. So, if you need the Z3x EMMC tool latest setup then you can download it from below.

Here I share with you all about What is the latest features? and the benefit of using it and how you can properly install it without facing any error. So let’s get straight into the main article.

Z3x EMMC Tool

What is Z3x Easy Jtag Tool?

Z3x easy jtag tool is an EMMC, UFS memory flashing and repairing tool. It helps users to flash and writing factory images, Reset Oppo Lock, Wipe user data, read, write, erase UFS, emmc card. Z3x team works really hard and improves the standard for more than 4years, and now it supports more than 400+ Android mobile phones. let’s check some best features:

  • ARM7/ARM9/ARM11, CORTEX-A8, Cortex-A9 Dual cores support
  • JTAG chain is supported and TAP number selection is available
  • No pin required for connection
  • Custom TCK Speed presetting selection
  • TCK/Adaptive clocking selection
  • Halt core
  • Reset core
  • Direct Read and Write memory
  • control registers of the ARM core
  • Program code breakpoints
  • Run Halt Restart core
  • 19 Pins Hardware Accelerated
  • Multiple flash chips (address space) support
  • One Button repair, resurrection help
  • interface pinout for each supported model

Read More: MRT Dongle Crack 3.19

Download Z3x Easy Jtag Latest Setup

The download process of Z3x Easy Jtag Latest Setup is pretty simple only you have to do is click on the below link and download the setup but I always recommended you download the Z3x Easy Jtag Tool setup from the official site.

File Name: Z3x Jtag 3.6.2.exe
File Size: 356MB
Type: exe
Supported OS: Windows
Download: Z3x Jtag Plus Tool

How to Reset user data With Easy Jtag

Reset user data using Z3x Easy Jtag is very. Just follow the below process carefully and install the right USB driver for your phone.

  • Download the Z3x Jtag Plus tool and extract it on your computer.
  • Run the jtagsetup.exe from there.
Z3x Easy Jtag Plus latest Setup EMMC Tool
  • Connect the Jtag box.
  • Go to the EMMC option.
  • connect your device in ISP or EMMC pinout mode.
  • tap on the detect button.
  • Now check your device is connected or not in the log box.
Z3x Easy Jtag Plus latest Setup  EMMC Tool
  • Go to the advanced option.
  • Click on Wipe User Data or If you have Oppo phone then click on Reset Oppo button.
  • That’s it.
  • This is a simple way to use a Z3x EMMC tool on your computer.

Read More: Miracle Box Latest Setup

Conclusion

I share here complete information about Z3x Easy Jtag tool. I hope i clear all your doubts regarding this topic.

Thanks for visiting us, Comment below if you face any problem With it, I will try to solve your problem as soon as possible. you can check other some tutorials here to help you.

Share on:

Leave a Comment