56 thoughts on “Bypass FRP Samsung Galaxy S8 SM-G950 – All- Android-8”

  1. Hi, when i download Samsung ADB-FRP Bypass website redirect me on this download link “SM-G935L_G935LKLU1DQF4_LUC.zip”
    please link me the correct file for download “Samsung ADB-FRP Bypass”

    Greetings

    Reply
  2. hello!

    My firmware is G950FFXXU3CRGH and the version is 8.0. Can you please tell me how to find right combination firmware, also i cant downgrade to 7.0. Thanks in advance.

    Cheers!

    Reply
    • Put your device in Recovery Mode By press and Hold (Volume+ and Bixby and Power) button, until you see the “Android” logo on your device then wait few sec you will see recovery mode – then share the firmware code here then i will send you the right combination

      Reply
  3. i have a SM-G950WVLU5BRG4, ive successfully acquired all files i need other than the combination rom, I try the link and i get sent to bulls**** can you fix the link please or give me an alternate one? Thanks.

    Reply
  4. i have a SM-G950WVLU5BRG4 and ive successfully acquired everything but the right combination file, can you fix link or give me an alternate one to what i need? thanks in advance.

    Reply
  5. i have a 8.0.0 SM-G950WVLU5BRG4 (Galaxy S8) but if im reading correctly that means i have a bootloader version U5 can you throw up a link for the proper Combination file i need please?

    Reply
    • Maybe there option of USB Debugging option, enable that then download ADB FRP and run the ADB FRP on your computer then Remove the FRP, Now put your device download mode again and check frp lock option is on or off if off then flash the stock firmware.

      Reply
    • If OEM Unlocking options are not appearing on your device screen then just enable USB debugging mode and then download ADB FRP tool and run the tool then check your device you will get a popup tap ok there and close and reopen the ADB FRP tool then press any key to remove frp then flash the stock firmware, make sure without select the CP file of the stock firmware in odin tool.

      Reply
  6. FRP and OEM Lock is ON the OEM unlock button is not in the Settings an it always ends in a fail at Odin
    i dont know why it always fail in the last step

    Reply
  7. OEM unlock is missing, FRP bypass does nothing. where should the phone be fo it to work?

    the combination file is on, boots into it. did all the steps, exept oem unlock is gone G950F.

    Reply
    • when you run the frp tool, then check on your phone screen you will get “ADB” “Allow USB Debugging” confirmation message tap “ok” there, and then restart the ADB FRP tool and and tap any key .

      Reply
  8. The link to ADB-FRP file leads to a .rar that doesn’t contain the ADB-FRP tool. Please help me I can’t find it anywhere

    Reply

Leave a Comment